Deva Med Spa Commercial Buildout — North Vancouver, BC

Treatment rooms are built around the equipment

The difference between a med spa that runs smoothly from opening day and one that is permanently working around its own building is whether the treatment rooms were designed for the devices that go in them. Aesthetic and laser equipment carries real requirements: dedicated circuits and electrical loads, water supply and drainage for the units that need it, heat output and the cooling and ventilation to handle it, and physical clearance for the practitioner to work around the device with a client on the table.

All of that has to be resolved before the walls close. Adding a dedicated circuit or a drain to a finished treatment room means opening finished surfaces in a clinical space, so the equipment plan needs to drive the rough-in rather than follow it. Where a client is still selecting devices, we plan for the electrical and servicing capacity the likely candidates require instead of building to the minimum.

The Pro 1 Laser advantage

Through our work with Pro 1 Laser we understand the equipment as well as the build. Knowing what a given device actually draws, what it needs for water and ventilation, and how much room a practitioner needs around it means the room is specified correctly the first time. That equipment-side knowledge is unusual in a general contractor and it is the reason med-spa clients come to us specifically.

Clinical finishes and client experience

A med spa has to read as clinical and reassuring at the same time. Surfaces in treatment areas need to be genuinely cleanable — non-porous, properly sealed at junctions, and able to take repeated cleaning without degrading — while the reception and waiting areas need to feel calm and considered, because that is where a client forms their first impression. The two zones call for different finish decisions, and the transition between them is where a buildout either looks intentional or looks compromised.

Privacy, acoustics, and layout

Treatment is private, and clients notice immediately if it does not feel that way. Acoustic separation between treatment rooms and between treatment rooms and reception is a framing-stage decision — wall build-up, insulation, sealing, and how doors are detailed. The circulation plan matters as much: a client should move from reception to a room without passing through staff or operational space.

Clinical and commercial experience on the North Shore

We build medical clinics, dental offices, and med spas as well as general commercial interiors, and we bring over 25 years of construction experience and a clean WorkSafeBC record to each. One team manages design coordination, permits, trades, and the schedule, with an itemized estimate so you can see exactly what the treatment rooms cost against the rest of the buildout.